Good User Reputation for Ss Hex Bolt - Embedded 9-shaped anchor bolt with high strength – Juntian

Short Description:

Product Detail

Product Tags

Feedback (2)

We've been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for Wall Bolts , Ceiling Anchor Bolt , Brass Hex Bolts , With the development of society and economy, our company will keep a tenet of "Focus on trust, quality the first", moreover, we expect to create a glorious future with every customer.

Good User Reputation for Ss Hex Bolt - Embedded 9-shaped anchor bolt with high strength – Juntian Detail:

Juntian Bolt manufactures custom round bend hook bolts from M6-M64 diameter to virtually any specification. Hook bolts are provided either plain finish or hot-dip galvanized. Stainless steel hook bolts are also manufactured.

Anchor Bolt

A fixing bolt (large long screw) used to fix large machinery and equipment. One end of the bolt is a ground anchor, which is fixed on the ground (usually poured into the foundation). It’s a screw for fixing machinery and equipment. The diameter is generally around 20 ~ 45 mm.. When embedding, cut the hole reserved on the steel frame in the direction of the anchor bolt on the side to form a groove. After mounting, press a shim under the nut (the middle hole passes through the anchor bolt) to cover the cut hole and groove. If the anchor bolt is long, the shim can be thicker. After tightening the nut, weld the shim and the steel frame firmly.

When the mechanical components are installed on the concrete foundation, the J-shaped and L-shaped ends of the bolts are buried in the concrete for use. The tensile capacity of the anchor bolt is the tensile capacity of the round steel itself, and its size is equal to the cross-sectional area multiplied by the allowable stress value (Q235B:140MPa, 16Mn or Q345:170MPA), which is the allowable tensile capacity in design. The anchor bolts are generally made of Q235 steel, which is round. Threaded steel (Q345) has high strength, so it is not as easy to make the thread of the nut as it is to be round. For round anchor bolts, the buried depth is generally 25 times of their diameter, and then a 90-degree hook with a length of about 120mm is made. If the bolt has a large diameter (e.g. 45mm) and the buried depth is too deep, you can weld a square plate at the end of the bolt, that is, make a big head (but there are certain requirements). Buried depth and hook are to ensure the friction between the bolt and the foundation, so that the bolt will not be pulled out and destroyed.

Product Display

Round-Hook-(2)
Round-Hook-(1)

Product detail pictures:

Related Product Guide:

We believe that long expression partnership is often a result of top of the range, value added service, prosperous encounter and personal contact for Good User Reputation for Ss Hex Bolt - Embedded 9-shaped anchor bolt with high strength – Juntian, The product will supply to all over the world, such as: Swedish, New York, Jamaica, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.

Anchor Bolts For Brick